Shenshi Intelligent SR Series 3D Camera
| Parameter | Type | Description | Dependency |
|---|---|---|---|
| Controller Address | IP | Specify the IP address of the camera controller | |
| Software Trigger | Boolean (Switch) | Set whether software trigger is required for image capture | |
| Y-axis Point Spacing | Float | Specify the Y-axis point spacing | |
| Remove Invalid Points | Boolean (Switch) | Set whether to enable the function of removing invalid points; an unordered point cloud will be output after removing invalid points |
Camera Usage
Camera Preparation
- Ensure the IP address of the camera controller and the network card IP address are in the same subnet.
- Verify that images can be captured using the official camera software and meet the desired results.
Add and Connect Device
Tip
Please close the official image capture software before connection to avoid mutual interference.
Tip
If the desired IP is not in the IP option list, you can wait for a moment and click Refresh, or re-enter the configuration interface. If it is still not found after multiple attempts, please ensure the camera is connected to the PC and the camera IP address is in the same subnet as the network card IP address.
Image Capture Test
